Welcome to Wammi World

This is the famous Kahler 7 string locking nut with String Director. It has a width of 1 7/8 " (47.5mm) with a 15" radius. All of the Kahler string director (SD) locknuts, since the dawn of time, have used the top loading, #9525 clamp plates with the offset hole. The clamping screw is screwed down onto the clamp plates using a 3/32" hex key for the cap type screws #8440, as shown, or a 1/8" hex key for the taller hex/slotted screws #5441. The string director is mounted on the base just behind the clamping plates thus eliminating the need for a string bar or string trees. Rounded string bumpers help guide the strings through the clamp plates and on toward the tuners without snagging  which greatly reduces risk of string breakage between locking point and tuner. The string director also prevents string from rubbing on locking screw under the pad.